MXL5007T QFN32 ORIGINAL

The local oscillator’s frequency depends on the intermediate frequency (IF) output
from tuner. MxL5007T supports different IF values, which can be found from the
Linux drivers mentioned in the Software section.
The IF values are as follows: 4 MHz, 4.5 MHz, 4.57 MHz, 5 MHz, 5.38 MHz, 6
MHz, 6.28 MHz, 9.1915 MHz, 35.25 MHz, 36.15 MHz and 44 MHz. For the
detector I used, in low-side injection mode (local oscillator frequency is smaller
than received frequency – the IF from tuner in this case) only the 35.25 MHz, 36.15
MHz and 44 MHz values can be used. Thus, the L.O. can have one of the
following frequencies: 24.55 MHz, 25.45 MHz and 33.3 MHz. You can get both
the coil and the capacitor from: